Book online and get 15% off any repair.
Twin Falls (208) 595-2261
Lee’s Summit (816) 246-2060

DuraForce Pro 3 repair

Rugged 2023 Kyocera with a 5.8-inch LCD, MIL-STD-810H rating, glove-friendly touch and a physical PTT key. Screen, battery, charging port, camera and water damage repair in Twin Falls, ID and Lee’s Summit, MO, with a free diagnostic and a 1-year warranty.

DuraForce Pro 3 at a glance
Released2023
Display5.8″ LCD
FrameRugged polycarbonate
BackRugged polycarbonate
Water ratingIP68
UnlockSide-button fingerprint
Wireless chargingQi
Typical turnaround30 to 60 minutes
Warranty1 year
Most repairs in about 30 minutes
1-year warranty on every repair
Low-price guarantee
Free diagnostic, no obligation

What we fix

DuraForce Pro 3 repairs

Book a repair
Screen replacementCracked glass, lines, dead touch
Battery replacementDrains fast, swells, shuts off
USB-C charging portLoose, dirty or dead port
Cameras & lens glassBlurry, black, cracked lens
Back cover & frameCracked or bent housing
Water damageBoard clean, dry, test
Speaker & microphoneMuffled or silent
Won’t turn onBoard-level diagnosis
Fingerprint buttonReader on the power key

Kyocera · 2023 · mid

DuraForce Pro 3 repair: the practical version

Rugged phones are sealed with gaskets rather than glue; after any screen or battery work we replace the gaskets so the IP68 rating holds. The LCD is a Kyocera part and ordered. Charging port has a sealed cover that is a common wear item.

Screen replacement

The DuraForce Pro 3 uses a 5.8-inch LCD, which keeps screen replacement one of the least expensive repairs we do. Even a shattered screen is usually a same-day job of under an hour, and the digitizer comes with the panel so touch is restored at the same time.

Battery replacement

Phones from 2023 are now at the age where the battery is the most common reason a DuraForce Pro 3 comes to the counter. Fast drain, sudden shutdowns in the cold or a screen that is lifting at one edge from a swelling cell all point to the battery. We fit a new cell, reseal the phone and verify charging and battery health before you leave.

Charging port, cameras and buttons

A charging port that only works at an angle is usually lint, and cleaning it is free. A port that is dead or loose is replaced. Cameras, speakers, microphones and buttons are all modular on the DuraForce Pro 3 and are replaced the same day when the part is in stock.

Back cover and frame

The back of the DuraForce Pro 3 is rugged polycarbonate, which does not shatter, so rear repairs on this model are rare. The camera lens glass is still a separate part and is replaced on its own when it cracks.

Water damage

The DuraForce Pro 3 is IP68 rated, which protects it when new but not after a drop opens a gap in the seal. After a swim we open it, clean the board and dry it before testing, and after any screen or back repair we fit fresh adhesive so the seal is restored.

Turnaround

We keep screens and batteries for the DuraForce Pro 3 in stock at both stores, so most repairs are done while you wait, usually in 30 minutes to an hour. Parts we have to order still land within 3 to 5 business days.

Which DuraForce Pro 3 do I have?

Find the model name in Settings, About phone, Model. Kyocera model numbers start with E or KY.

Quick check: 2 rear cameras, 5.8-inch screen, rugged polycarbonate frame, side-button fingerprint.

Other Kyocera models we repair

Other 2023 phones

Book a DuraForce Pro 3 repair

Tell us what’s wrong and we’ll have the part and a tech ready.

Walk-ins welcome too. Free diagnostic on every device. Booking online saves 15% on the repair.

Protected by reCAPTCHA. Google Privacy Policy and Terms of Service apply.

Questions

DuraForce Pro 3 repair FAQ

How much does a DuraForce Pro 3 screen repair cost?

We quote it after a free diagnostic and before any work starts, because the price depends on which part your phone needs. The DuraForce Pro 3 sits in the mid-range, so its screen and battery cost noticeably less than a flagship’s and the repair is almost always worth doing. Every repair comes with a one-year warranty and our low-price guarantee.

What breaks most often on the DuraForce Pro 3?

At this age, the battery. A 2023 DuraForce Pro 3 that drains fast or shuts off in the cold needs a new cell, and it is a quick job. Screens are a close second.

How long does a DuraForce Pro 3 repair take?

We keep screens and batteries for the DuraForce Pro 3 in stock at both stores, so most repairs are done while you wait, usually in 30 minutes to an hour. Parts we have to order still land within 3 to 5 business days. The 5.8-inch LCD screen is the part we stock most for this model.

Will I lose my data when you repair my DuraForce Pro 3?

No. Screens, batteries, ports, cameras and back covers on the DuraForce Pro 3 do not touch your data. We only reset a phone if you ask us to, or if a board-level repair requires it, and we tell you first.

Where can I get my DuraForce Pro 3 fixed near me?

PhoneFixation has stores at 830 Blue Lakes Blvd. N in Twin Falls, Idaho and 1624 SE Blue Parkway in Lee’s Summit, Missouri, both open seven days a week. Walk in, or book online and save 15%.

Rather replace it?

Bench-tested, unlocked phones at both stores, and trade-in credit for your working DuraForce Pro 3.

Phones for sale

Broken DuraForce Pro 3? Fixed today.

Walk in, call, or book online and save 15%.

Book a repair (208) 595-2261